Yamaha 02R 96 Versione 2

See all Yamaha products on CHERUBINI.com

Specifications

Meet the New Standard: The Yamaha 02R96 Digital Mixing Console

A lot has changed in the world of digital audio production since the Yamaha 02R sparked the revolution back in 1995. But through it all the 02R became and remained the professional standard. Now, as the industry settles on the 24-bit 96-kHz format for the foreseeable future of professional digital audio, and surround sound proves that it is here to stay, it's time for a change. Meet the new standard: the 02R96. With more than five times the processing power of the original 02R, the 02R96 represents a thorough revision that brings every aspect of the console up to date with today's most advanced production needs. And since the 02R96 inherits key features from Yamaha's flagship DM2000 Digital Production Console - 96-kHz audio, surround monitoring, studio manger software, and DAW control - it makes the most advanced technology for commercial sound and music production available to a broad range of engineers and facilities.

56 channels at up to 96 kHz

8 busses

8 AUX

4 internal effect processors (1 Surroundprocessor)

24 analog inputs

8 omni outs

4 slots for optional interface cards (further analog inputs, ADAT, TDIF, AES/EBU,...)

Cascade-Ports to use two 02R96 together

direct parameter editing/operating in a selected channel by hardware controller in the selected-channel area

included, the „Studiomanager“ software for Mac and Windows, to edit the 02R96 on- or offline.

Print Product Chart

Tech Sheet

Number of scene memories  99 
Sampling Frequency  Internal
External  44.1kHz, 48kHz, 88.2kHz, 96kHz
Normal rate 44.1kHz-10% - 48kHz+6%
Double rate 88.2kHz-10% - 96kHz+6% 
Signal Delay
(CH INPUT to STEREO OUT)  Fs=48kHz
Fs=96kHz  1.9ms
0.7ms 
Fader  100mm motorized with touch sense x 25 
Fader Resolution
Master faders, Stereo fader  +10--96, -∞dB (256 steps/100mm )
0--130, -∞dB (256 steps/100mm) 
Total Harmonic Distortion *1
(CH INPUT to STEREO OUT)  Input Gain = Min.
Fs = 48(96)kHz  <=0.05% 20Hz to 20(40)kHz @+14dB into 600Ω
<=0.01% 1kHz @+18dB into 600Ω
 
Frequency Response
(CH INPUT to STEREO OUT)  Fs=48kHz
Fs=96kHz  0.5,-1.5dB 20Hz - 20kHz @+4dB into 600Ω
0.5,-1.5dB 20Hz - 40kHz @+4dB into 600Ω 
Dynamic Range
(maximum level to noise level)  DA Converter (STEREO OUT)
AD+DA (to STEREO OUT)  110dB typ., Fs=48 or 96kHz

105dB typ., Fs=48 or 96kHz 
Hum & Noise *2
(20Hz-20kHz)

Rs=150Ω
Input Gain=max.
Input Pad=0dB
Input Sensitivity=-60dB  -128dB (EIN : Equivalent Input Noise)
-92dB (Residual Output Noise) @STEREO OUT
STEREO OUT off
-92dB (96dB S/N) @STEREO OUT
STEREO fader at nominal level and
all CH INPUT faders at minimum level
-64dB (68dB S/N) @STEREO OUT
STEREO fader at nominal level and
one CH INPUT fader at nominal level 
Maximum Voltage Gain  74 [48]dB from CH INPUT1-16 [17-24] to STEREO OUT/OMNI (BUS) OUT
74 [48]dB from CH INPUT1-16 [17-24] to OMNI (AUX) OUT (via pre input fader)
74 [48]dB from CH INPUT1-16 [17-24] to CONTROL ROOM MONITOR OUT (via STEREO bus) 
Power Requirements  230V 200W 50Hz. 
Dimensions  Height
Depth
Width  239(352) mm (including the MB02R96)
697 mm
667(700) mm (including the SP02R96) 
Weight  34 kg 
Operating free-air
temperature range  10-35°C 
Storage temperature range  -20-60°C 
Accessories  AC Cable
CD-ROM (Studio manager) 
Options  Digital audio interface card (MY8, MY4 series)
Peak Meterbridge: MB02R96
Side Panel: SP02R96 
*1 Total Harmonic Distortion is measured with a 6dB/octave filter @80kHz.
*2 Hum & Noise are measured with a 6dB/ octave filter @12.7kHz equivalent to a 20kHz filter with infinite dB/octave attenuation. 

 
 
Effect libraries (EFFECT 1-4)  Number of factory presets
Number of user libraries  52 (EFFECT 3-8 :44)
76 
Compressor libraries  Number of factory presets
Number of user libraries  36
92 
Gate libraries  Number of factory presets
Number of user libraries  4
124 
EQ libraries  Number of factory presets
Number of user libraries  40
160 
Channel libraries  Number of factory presets
Number of user libraries  2
127 
Surround Monitor libraries  Number of factory presets
Number of user libraries  1
32 
Input patch libraries  Number of factory presets
Number of user libraries  1
32 
Output patch libraries  Number of factory presets
Number of user libraries  1
32 
Bus to stereo libraries  Number of factory presets
Number of user libraries
 1
32 

 
 
ANALOG INPUT CHARACTERISTICS 
Input
Terminals  Position  Actual
Load
Impedance  For Use
with
Nominal  Input Level  Connector
in Console 
PAD
SW  GAIN
TRIM  Sensitivity
*1  Nominal  Max
before
clip 
CH INPUT
A/B
1-16  0dB  -60dB  3kΩ  A: 50-600Ω
Lines
B: 600Ω
Lines  -70dB (0.245mV)  -60dB (0.775mV)  -46dB (3.88mV)  A: XLR-3-31 type (Balanced) *2
B: Phone Jack (TRS) (Balanced) *3 
26dB  -16
(+10)dB  -26dB (38.8mV)  -16dB (0.123V)  -2dB
(616mV) 
0dB
(775mV)  +10dB
(2.45V)  +24dB (12.28V) 
CH INPUT
17-24     -34dB  4kΩ  600Ω
Lines  -70dB (0.245mV)  -60dB (0.775mV)  -46dB (3.88mV)  Phone Jack (TRS) (Balanced) *3 
+10dB  0dB
(775mV)  +10dB
(2.45V)  +24dB (12.28V) 
CH INSERT
in
1-16     10kΩ  600Ω
Lines  -6dB
(388mV)  +4dB
(1.23 V)  +18dB
(6.16V)  Phone Jack (Unbalanced) *4 
2TR IN
ANALOG 1(L,R)  10kΩ  600Ω
Lines  +4dB
(1.23V)  +4dB
(1.23 V)  +18dB
(6.16V)  Phone Jack (TRS) (Balanced) *3 
2TR IN
ANALOG 2(L,R)  10kΩ  600Ω
Lines  -10dBV
(0.316V)  -10dBV
(0.316V)  +4dBV
(1.58V)  RCA Pin Jack (Unbalanced) 
*1. Sensitivity is the lowest level that will produce the nominal output level when the unit is set to maximum gain. (all faders and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*3. Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4. CH INSERT IN/OUT phone jacks are unbalanced. (Tip=OUTPUT, Ring=INPUT, Sleeve=GND)
• In these specifications, when dB represents a specific voltage, 0dB is referenced to 0.775 Vrms.
• For 2TR IN ANALOG 2 levels, 0dBV is referenced to 1.00 Vrms.
• All AD converters are 24 bit linear, 128times oversampling.
• +48V DC (phantom power) is supplied to CH INPUT (1-16) XLR type connectors via each individual switch. 

ANALOG OUTPUT CHARACTERISTICS 
Output Terminals  Actual Source Impedance  For Use
With
Nominal  GAIN SW  Output Level  Connector
in Console 
Nominal  Max before clip 
STEREO OUT
(L,R)  600kΩ
 10kΩ
Lines  -  -10dBV (0.316V)  +4dBV
(1.58V)  RCA Pin Jack (Unbalanced) 
150Ω  600kΩ
Lines  -  +4dB
(1.23 V)  +18dB
(6.16 V)  XLR-3-32 type (Balanced) *1 
STUDIO MONITOR OUT
(L,R)  150kΩ  10kΩ
Lines  -  +4dB
(1.23 V)  +18dB
(6.16 V)  Phone Jack (TRS) (Balanced) *2 
C-R MONITOR OUT (L,R)  150kΩ  600kΩ
Lines  -  +4dB
(1.23 V)  +18dB
(6.16 V)  Phone Jack (TRS) (Balanced) *2 
OMNI OUT 1-8  150Ω  10kΩ
Lines  +18dB
(default)  +4dB
(1.23 V)  +18dB
(6.16 V)  Phone Jack (TRS) (Balanced) *2 
+4dB
(1.23V)  -10dB
(0.245V)  +4dB
(1.23V) 
CH INSERT OUT 1-16  600Ω  10kΩ
Lines  -  +4dB
(1.23 V)  +18dB
(6.16 V)  Phone Jack (Unbalanced) *4 
PHONES  100Ω  8kΩ
Lines  -  4mW  25mW  Stereo Phone Jack (TRS)
(Unbalanced)*3 
40kΩ
Lines  -  12mW  75mW 
*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2. Phone jack are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3. PHONES stereo phone jack is unbalanced. (Tip=LEFT, Ring=RIGHT, Sleeve=GND)
*4. CH INSERT IN/OUT phone jacks are unbalanced. (Tip=OUTPUT, Ring=INPUT, Sleeve=GND)
• STEREO OUT [L, R], 0dBV is referenced to 1.00 Vrms.
• In these specifications, when dB represents a specific voltage, 0dB is referenced to 0.775 Vrms.
• All output (except INSERT OUT 1-16) DA converters are 24bit, 128times oversampling. 

DIGITAL INPUT CHARACTERISTICS 
Terminal  Format  Data Length  Level  Connector
in Console 
2TR IN
DIGITAL  1  AES/EBU  24-BIT  RS422  XLR-3-31 type
(Balanced)*1 
2  IEC-60958  24-BIT  0.5Vpp/75Ω  RCA Pin Jack 
3  IEC-60958  24-BIT  0.5Vpp/75Ω  RCA Pin jack 
CASCADE IN  -  -  RS422  D-SUB
Half Pitch
Connector
68P (Female) 
*1. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) 

DIGITAL OUTPUT CHARACTERISTICS 
Terminal  Format  Data Length  Level  Connector
in Console 
2TR OUT
DIGITAL  1  AES/EBU*1
Professional
Use  24-BIT*3  RS422  XLR-3-32 type
(Balanced)*4 
2  IEC-60958*2
Consumer
Use  24-BIT*3  0.5Vpp/75Ω  RCA Pin Jack 
3  IEC-60958*2
Consumer
Use  24-BIT*3  0.5Vpp/75Ω  RCA Pin jack 
CASCADE OUT  -  -  RS422  D-SUB
Half Pitch
Connector
68P (Female) 
*1.channel status of 2TR OUT DIGITAL 1
type: 2 audio channels
emphasis: NO
sampling rate: depends on the internal configuration

*2.channel status of DIGITAL OUT 2,3
type: 2 audio channels
category code: 2 channel PCM encoder/decoder
copy prohibit: NO
emphasis: NO
clock accuracy: Level II (1000 ppm)
sampling rate: depends on the internal configuration

*3. dither: word length 16 - 24 bit
*4.XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)