Montarbo W14A

See all Montarbo products on CHERUBINI.com

Specifications

Simplicity is the core of the project for this loudspeaker enclosure with
its unique and innovative design.
Made from high-density polyethylene, it is not only beautiful, but also resistant, indestructible and recyclable.

Flexible, rapid and safe assembling in fixed and mobile installations thanks
to the 6 fly points included in the cabinet shape.

The components are custom designed to Montarbo specifications and operate in complete synergy with the dedicated electronic circuitry:
- 12" neodymium magnet woofer for the bass section
- 1,4" driver coupled with a constant directivity horn (60°H x 40°V) for the mid-high section.

2 built-in MosFet class AB power amplifiers.
Output power:
450 W continuous, 650 W peak for the low frequencies
150 W continuous, 250 W peak for the mid-high frequencies

2 independent dynamic processors.

High slope electronic crossover (24dB/octave, 1 kHz, Linkwitz-Riley).

The rear panel is fitted with balanced XLR input and output (link) connectors,
master volume control, mid-high level control and ground-lift.

The shape of the cabinet allows for both vertical and horizontal installation
(for stage monitoring). Easily flyable thanks to the 6 fly points.
It is also equipped with 2 side handles (for easy carry and set-up) and with
a stand adapter.

Print Product Chart

Tech Sheet

Enclosure: 2 way bass-reflex
Frequency response: 45Hz ÷ 20kHz
Sensitivity (1W, 1m): 100,5 dB
Max SPL: 128dB
Components (custom): 12" neodymium magnet woofer
1,4" driver with constant directivity horn (dispersion 60°H x 40°V)
Passive crossover: passive phase alignment network
Electronic crossover: 1 kHz, 24dB/Oct (Linkwitz-Riley)
Construction:  High density polyethylene
6 fly points integrated in the cabinet shape
Steel protection grille
Side handles
Stand adapter
Amplifier: 2 MosFet, class AB, amps controlled by 2 independent active dynamic processors
Max. output power: 450 + 150 W continuous
(8 ohms / 0,1% THD)
Bass:
450 W continuous
650 W peak
Mid/High:
150 W continuous
250 W peak
Connections:  Balanced XLR input and output (link) wired in parallel
Dimensions (WxHxD): 41 x 68,3 x 36 cm 
Weight: 26 kg