Montarbo 119SA

See all Montarbo products on CHERUBINI.com

Specifications

119SA produces extremely high sound pressure levels, increases the sonic quality of any speaker system reinforcing any music style. Thanks to the built-in electronics it combines with any loudspeaker system, no matter what brand, model or kind, to implement sound performances which are hard to believe.

18" woofer, custom designed to Montarbo specs.

Built-in MosFet class AB power amplifier: 600 W continuous, 900 W peak

A dedicated processor protects amplifier and speaker against all overloads optimizing their performance in any situation.

Built-in STEREO, high slope (24dB octave / 100Hz), electronic crossover for easily integrating the subwoofer with any sound system.

Incredibly easy to set up and operate. Inside it, every single component is already wired and properly chained to the others.
Once the crossover divides the signal in two frequency ranges, the upper range is sent to the satellites while the low range drives the loudspeaker through the processor and the amplifier. Deep, powerful sound up to the last watt.
No distortions, no breaks-up, no troubles.

The rear panel is fitted with balanced XLRs for the stereo input and for the link outputs (for parallel connection of additional systems), unbalanced XLRs for the stereo output, Flat/X-Over switch, input level control, and ground-lift switch.

Adaptor for satellyte supporting pole SM4 (optional accessory).

Side handles for transport.

Ideal partner for the Montarbo self-powered enclosures T10A, W400A, T12A, T15A, W14A and W17A, the 119SA combines with any loudspeaker system, no matter what brand, model or kind.

Print Product Chart

Tech Sheet

Enclosure: bass-reflex
Frequency response: 37Hz ÷ 100Hz
Sensitivity (1W, 1m): 100 dB
Max SPL: 129 dB (half space)
Components (custom): 18" high efficiency woofer
Electronic crossover: STEREO, 100Hz, 24dB/oct
Construction:  Multiply. Polyurethane paint
Steel protection grille
Side handles
Adaptor for satellyte supporting pole SM4
Amplifier: MosFet, class AB, controlled by an active dynamic processor
Max. output power: 600 W continuous
(4 ohms / 0,1% THD)
900 W peak
Connections:  Balanced XLRs for the X-over stereo input and for the 'link' outputs (wired in parallel)
Unbalanced XLRs for the X-over stereo output
Dimensions (WxHxD): 56 x 65 x 45 cm
Weight: 37 kg