Audio-technica AT3035
Clicca sulla
bandierina italiana e vedi questa pagina in
ITALIANO
Specifications
Designed for critical home/project/professional studio applications and live performance, this 30 Series large-diaphragm side-address cardioid condenser delivers exceptional detail and low noise. With its extended low-frequency response, the AT3035 produces rich, full sound reproduction and handles extremely high sound pressure levels with ease. Tailored for a smooth, natural sound, this mic is a perfect complement for digital recording equipment. Along with its rugged construction and high-performance specifications, the AT3035 provides an exceptional level of consistency from model to model.
Custom-engineered large diaphragm for exceptional detail and low noise
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
High max SPL, wide dynamic range and optimized output level provide unmatched versatility
Low self-noise (12 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
Extended low-frequency response for rich, full sound
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
Custom shock mount provides superior isolation
Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
Print Product Chart
Tech Sheet
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -32 dB (25.1 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal)
NOISE 12 dB SPL
DYNAMIC RANGE (typical) 136 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 82 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
SWITCHES Flat, roll-off;
10 dB pad (nominal)
WEIGHT 13.8 oz (390 g)
DIMENSIONS 6.69" (170.0 mm) long,
2.05" (52.0 mm) maximum body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8458 shock mount for 5/8"-27 threaded stands; soft protective pouch
AUDIO-TECHNICA CASE STYLE R5
