Wharfedale Pro Titan 12

See all Wharfedale products on CHERUBINI.com

Specifications

Wharfedale Pro Titan™ 12 series with 12”/2” voice coil LF components and 44mm Titanium Diaphragm true Compression Driver and the integrated 90°x60° Waveguide horn to achieve a clean volume dispersion with wide, even reflection of the high frequency. The cabinets of the Titan™ series are made of extremely resonance proof High Density Polyethylene structural foam finished. This material gives a lightweight and very robust enclosure.

The system can be arrayed for additional coverage and SPL requirements. The elliptical waveguide HF section provides consistent coverage over its specified range for low feedback in open mic applications and improved array smoothness, whether applied to a reverberant or “dry” club type acoustic environment The Titan™ 12 integrates successfully with the room for superior sound quality with a minimum of equalization and tuning.

For permanent sound installations, architectural compatibility of primary importance, mounting points become critical. Titan™ 12 series threaded points (Three on top, four on bottom, and three on each side for horizontal rigging) set a standard with Omnimount footprint on bottom.


 Proprietary 90 x 60 Elliptical Wave Guide Horn design


 Custom Heavy duty moisture-proof 12" LF driver


 High-end Titanium HF Compression Driver


 Tough Polypropylene molded cabinet with rubber padded handles


 Multiple M8 rigging points and integral tripod stand adapter


 Rugged protective grille and top-stacking receptacles


 Trapezoid shape for arrays as well as stage monitor applications


 DTF™ - High-Frequency Driver Overload protection


 Sophisticated Linkwitz-Riley 24dB/octave crossover design


 High-Frequency EQ switch (boost/flat) for long-throw applications


 Both 1/4" and NL4 connectors provided


 Available in grey & white

Print Product Chart

Tech Sheet

GENERAL INFO  
System type 12” 2-way passive
Frequency response +/- 3db 55-20kHz
Sensitivity (db 1w@1m) 98dB
Maximum SPL Peak dB 120dB
System impedance 8 ohms
POWER HANDLING (Watts)  
Continous RMS 250
Program 500
Peak 1000
LF DRIVER  
Lf driver size mm / inches 1x12”  
Lf voice coil size 64.26mm/2.5"
HF SECTION  
Hf voice coil size 44mm/1.75"  
Hf exit size mm / inches 25mm/1"
Hf type Compression Driver
Hf diaphragm material Titanium
Horn dispersion (H x V) 90 x 60
Hf horn shape EWG™ - Elliptical Waveguide
Hf peak indicator Peak LED ring in horn throat
CROSSOVER SECTION Type: 2-way
Crossover Frequency / Filter 2.4 kHz / Linkwitz-Riley
Hf driver protection DTF™ — Dynamic Thermal Filament  
Hf EQ (Boost / Flat) 3dB boost (long-throw) / Flat (near-field)
IN / OUT PANEL (speaker Level)  
Input connector 2 x 1⁄4” jacks and2 x Speakon™
PHYSICAL FEATURES  
Enclosure type Molded Polypropylene
Enclosure shape Trapezoidal for vertical array and horizontal stage monitor applications
Finish Black or White
Suspenison points (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint  
Stand adapter - BOTTOM Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket
Stand adapter - TOP Optional dual-unit array speaker stand hardware
Handle quantity 2 carry handles (one on each side)  
DIMENSIONS & WEIGHT  
Height ( mm / ins ) 556mm/21.88"
Width Front / Rear / mm / ins 384mm/15.1" / 180mm/7.1"
Depth ( mm / ins ) 312mm/12.3"
Net weight ( kg / lbs ) 12kg/26.4lbs
Gross weight ( kg / lbs ) 14kg/30.8lbs