RCF ART 315

See all RCF products on CHERUBINI.com

Specifications

ART 315, ideal for live sound situations, offer the same careful acoustic design and innovative transducers used in the active series. Very good punch in bass reproduction and extremely accurate high frequencies, ART 315 is the perfect solution for playback and installation situations where an external amplifier is required.

RCF ART 315 is a wide dispersion, 2 way sound reinforcement speaker. It integrates a high power LICC high level crossover network and RCF low distortion, high power transducers. The result is a compact, high power accurate system, unique in its class for clarity and low distortion.

The new 15” inch woofer is the result of the latest refinement in years of RCF experience in compact 2 way speaker manufacturing, resulting in an accurate reproduction of the midbass frequency range and a tight punchy bass.

The compression driver uses a new 1.5” titanium dome in front of a low compression, optimised geometry, radial phase plug. This innovative design is powered from a high flux neodymium magnet and offers a very open and natural midrange sound and extreme precision in high frequency reproduction.

Our LICC low impedance compensated crossover network featuring lower (than conventional) induction value in series with the woofer offer delay reduction, reduced phase shift and superior transient response. The compression driver is protected by a fast dynamic electronic circuit.

The input section presents 2 x NL4 Speakon® connectors offering an easy loop-through link.

All components are housed in a strong, lightweight, polypropylene composite enclosure. Woofer and compression driver throat are protected from a strong, powder coated, metal grille. The cabinet features four M10 threaded fly points, a 35 mm pole mount adaptor two side handles and a ergonomic top handle.

- 300 watt power handling
- 128 dB max SPL
- Wide dispersion, 90 x 60 low distortion, constant directivity horn
- 15” high power woofer, 64mm edge wound aluminium coil
- 1” neodymium, titanium dome, high frequency driver
- LICC low impedance compensated crossover, electronic driver protection
- 2 x NL4 Speakon® connector
- 2 side handles and 1 ergonomic top handle for easy transportation and positioning
- Four M10 fly points and pole mount adaptor
 

 

Print Product Chart

Tech Sheet

ACOUSTICAL SPECIFICATIONS
Frequency response  50-20Khz  
Max SPL  128dB  
Sensitivity 1w/1m  99  
Coverage angle  90x60  
Compression driver  neo1"  
Midrange  -  
Woofer  15"  
Power handling  300W  

INPUT SECTION
Input signal- Impedance  8 Ω  
Input connector  speakon  
Output signal connector  speakon  
Input sensitivity  -  
Mic. input sensitivity  -  

PROCESSOR SECTION
Crossover frequencies  1800Hz  
Selectable high pass output  -  
Protections  electronic  
Limiter  -  
Master volume  -  
Phase switch  -  
Music/Voice eq  -  
Remote control option  -  

AMPLIFIER
Nominal power  -  
High frequencies  -  
Mid frequencies  -  
Low frequencies  -  
Cooling  -  

PHISICAL SPECIFICATIONS
Height  680mm (26,77")  
Width  405mm (15,94")  
Depth  345mm (13,58")  
Weight  17Kg  
Cabinet  Composite PP  
Hardware  4 M10 flying points  
Handles  2 side, 1 top  
Pole Mount / Cap  yes  
Colour  Anthracite grey