RCF Art 325-A

See all RCF products on CHERUBINI.com

Specifications

ART 325-A is the reference speaker in the new ART series. Ideal in live sound and installed situations, it is remarkable for deep bass punch, clean midrange output and accurate high frequencies. Offering the ultimate intelligibility in vocal and Recorded Music, from live sound to playback, from monitoring to fixed installation applications.

RCF ART 325-A is an active, wide dispersion 2 way sound reinforcement speaker. It integrates a high power 400 Watt amplifier, a complete electronic processor section and RCF Precision Series low distortion, high power transducer. The result is a compact, high power accurate system, unique in its class for linearity and low distortion.

This new high power 15” inch woofer is the result of the latest refinement in years of RCF experience in compact 2 way speaker manufacturing, providing a fast and accurate reproduction of the midbass frequency range and tight punchy bass. Features a 3” inside/outside voice coil to minimize power compression and extend the life of this product.

The compression driver uses a 0.05 mm pure titanium dome featuring a complex geometry suspension and Direct Drive coil. This innovative design is powered from a massive high flux neodymium magnet and an edge wound 64 mm aluminium voice coil. This unique driver offers a transparent midrange sound and an extreme fidelity in high frequency reproduction.

A generous 2 step class H TAED design is used to power the low frequencies and the compression driver amplifier is a warm and clear class AB design.

The Input section offers an XLR and Jack input connector that is switchable from microphone to line levels. A master volume control and a useful XLR loop-through link guarantee the best versatility. The processor section includes active crossover, system equalization, transducer phase alignment, limiter and protection functions. The system is visually monitored from 4 status LEDs.

All components are housed in a strong, lightweight, polypropylene composite enclosure. Woofer and compression driver throat are protected from a strong, powder coated, metal grille. The cabinet features four M10 threaded fly points, a 35 mm pole mount adaptor, two side handles and an ergonomic top handle.


-      400 watt Monolithic bi-amplification, 350 watt low frequency and 50 watt high frequency power
-     129 dB max SPL
-     Wide dispersion, 90 x 60 low distortion, constant directivity horn
-     15” high power woofer, 75mm inside/outside aluminium coil
-     2” neodymium, titanium dome RCF Precision Series high frequency driver
-     Electronic equalization, phase alignment, limiter and protection
-     Mic/Line XLR and Jack input, XLR signal output
-     2 side handles and 1 ergonomic top handle for easy transportation and positioning
-     Four M10 fly points and built in pole mount adaptor
-     Optional Infrared remote control for volume, mute and Eq adjustment

Print Product Chart

Tech Sheet

ACOUSTICAL SPECIFICATIONS
Frequency response     45-20Khz
Max SPL     129dB
Sensitivity 1w/1m     -
Coverage angle     90x60
Compression driver     neo2"
Midrange     -
Woofer     15"
Power handling     -

INPUT SECTION
Input signal- Impedance     bal/unbal
Input connector     jack/xlr
Output signal connector     xlr
Input sensitivity     0dBu
Mic. input sensitivity     -40dBu

PROCESSOR SECTION
Crossover frequencies     1200Hz
Selectable high pass output     -
Protections     DC/short cir.
Limiter     fast limiter
Master volume     yes
Phase switch     -
Music/Voice eq     yes
Remote control option     yes

AMPLIFIER
Nominal power     400Watt
High frequencies     ab/50Watt
Mid frequencies     -
Low frequencies     H/350Watt
Cooling     Convenction

PHISICAL SPECIFICATIONS
Height     680mm (26,77")
Width     405mm (15,94")
Depth     345mm (13,58")
Weight     24Kg
Cabinet     Composite PP
Hardware     4 M10 flying points
Handles     2 side, 1 top
Pole Mount / Cap     yes
Colour     Anthracite grey