SE Electronics USB-2200a

See all SE Electronics products on CHERUBINI.com

Specifications

Based on the studio standard sE2200a, the USB2200a records via USB directly to your DAW and has several features unique from competitor USB mics including, zero latency headphone monitoring, mix control playback/record path, 10dB pad, bass cut and simultaneous analogue/USB feeds.

The USB2200a also has a proprietary chip and software set which deals with capsule noise when transforming the 5v power supplied via the USB cable to power the capsule, by first removing noise and spikes from the current. This noise would normally be amplified, which is why other USB mics are too noisy to use in a professional environment.

No other USB mic on the market offers this kind of specification, and it makes a huge difference to the performance for studio use. The chip also delivers true plug in and play capability, automatically configuring the mic to the host as it is connected.

 

Print Product Chart

Tech Sheet

Frequency Response: 20Hz-20KHz
Sensitivity: 14.1mV/Pa -37 ± 1.5dB
Polar Pattern: Cardioid
Impedance: ≤ 200 Ohms
Equivalent Noise Level: 12dB(A weighted)
Max SPL for 0.5% THD@1000Hz: 130dB
Power Requirement: Phantom power 48V±4V
Connector: 3-pin


USB Connection via a 5-pin mini B, USB cable
    


Technical Parameters:

1.USB 2.0 USB1.x compatible
2.Stereo D/A and A/D conversion
3.Zero latency Headphone monitoring
4.Gain Control built in
5. At THD > -90db, SNR 96db (D/A conversion)
6 At THD > -90db, SNR 92db (A/D conversion)
7.Adaptive 44.1 to 48KHz sampling frequency