| 3.25” low-frequency drivers; 1” high-frequency drivers |
 |
| self-powered |
|
| remarkably accurate frequency response and imaging |
|
| advanced crossover design |
|
| custom-tuned wood cabinet |
|
| magnetic shielding prevents computer/video monitor interference |
|
| vented port design for added bass |
|
| transportable, compact design is ergonomic and flexible |
|
| internal standing wave acoustic absorption for greater efficiency |
|
| Bass Boost switch |
|
| factory programmed for worldwide use |
|
| RCA rear-panel inputs; convenient front-panel 1/8” inputs |
|
| includes directional stands to optimize listening “sweet spot” |
|
|
| Type: | two-way desktop reference monitor |
|
| LF Driver: | 3.25-inch diameter, magnetically shielded with curved cone with high-temperature voice coil |
|
| HF Driver: | 1-inch diameter, magnetically shielded silk dome |
|
| Frequency Response: | 100Hz - 20kHz (±3 dB) |
|
| Crossover Frequency: | 2.3kHz |
|
| Dynamic Range (Maximum Signal-to-Noise Ratio): | >80dB (typical, A-weighted) |
|
| Input Connectors: | left and right line input connectors (RCA) |
|
| Polarity: | positive signal at “+” input produces outward low-frequency cone displacement |
|
| Dynamic Power: | 10 watts into 4 Ω (per channel) at 0.5% distortion |
|
| Input Impedance: | 10k Ω (unbalanced) |
|
| Input Sensitivity: | 100mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum |
|
| Protection: | RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter |
|
| Indicator: | blue power LED ring around on/off/volume knob on front panel |
|
| Power Requirements: | 100-120V~50/60Hz, 220~240V~50/60Hz; powered via detachable 2-conductor line cord |
|
| Cabinet: | vinyl-laminated MDF |
|
| Dimensions: | 7.9" (H) x 5.5" (W) x 5.9" (D) |
|
| Weight: | 8.8 lbs./pair (approx., without packing) |
