Focusrite SAFFIRE PRO 26 I/O
Vedi tutti i prodotti Focusrite presenti su CHERUBINI.com
€ 856,80
€ 690,00
€ 166,80 (19%)
Click the
UK Flag and see this page in
ENGLISH
Descrizione
SAFFIRE PRO 26 I/O
Saffire PRO 26 i/o is the ideal Firewire interface for music recording enthusiasts on a mobile multi-channel mission, providing more inputs and outputs with higher performance specs than any other interface in its class. Saffire PRO 26 i/o combines eight award-winning pre-amps with sixteen channels of ADAT, and two channels of SPDIF (up to 192kHz). Also employed are Focusrite's high performance 24-bit digital converters.
Saffire PRO 26 i/o is much more than just a high performance breakout box; the Saffire PRO package includes Focusrite's highly acclaimed Saffire plug-in suite, comprising EQ, Compression, Amp Simulation and Reverb, in both VST and AU format. The hardware features 2 headphones outputs and a global monitor control with mute and dim options, as well as two 'super channels' featuring variable mic impedance and instrument input, instantly accessible on the front fascia.
The SaffireControl PRO software features many of the attributes of the original SaffireControl software, ensuring intuitive control over monitoring and level.*
- High Quality 24-bit/192k Bus-powered Firewire Interface
- 8 high quality Focusrite preamps with unrivalled A/D and D/A conversion
- TOTAL i/o count of 26 inputs and 26 outputs
- Free suite of Saffire VST/AU plug-ins (Compression, EQ, Reverb, Amp Sim)
- 2 ‘super channels’ with instrument input and variable impedance
- 2 separate Headphones buses on the front panel
- Free SaffireControl PRO software for advanced monitoring and level control*
- MIDI In and Out
- Word clock In and Out
- Front panel Level, Dim and Mute controls assignable to all outputs
Stampa la scheda prodotto
Scheda Tecnica
MIC
Frequency Response: 20Hz - 20kHz +/- 0.1 dB
THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
Noise: EIN > 120dB (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)
LINE Frequency Response: 20Hz - 20kHz +/- 0.1dB
THD+N: <0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
Noise: -90dBu (22Hz/22kHz bandpass filter)
INSTRUMENT Frequency Response: 20Hz - 20kHz +/- 0.1dB
THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter)
Noise: -87dBu (20Hz/22kHz bandpass filter)
DIGITAL PERFORMANCE Clock Sources: Internal clock, Sync to word clock on S/PDIF, Sync to word clock on BNC word clock input, Sync to word clock on ADAT1 or ADAT2 inputs
A/D Dynamic Range 110dB 'A-weighted' (all inputs)
D/A Dynamic Range 110dB ‘A-weighted' (all outputs)
Clock Jitter < 250 pico seconds
Sample rate 44.1 to 192kHz
WEIGHT and DIMS 3kg - 35cm x 4.5cm x 23.5cm
ANALOGUE INPUTS Mic: 8 x XLR on rear panel
Mic Gain: +13dB to + 60dB
Line 1-8: 2 x 1/4" TRS Jack (front panel)
Line 1-8 Gain: -10dB to +36dB
Instrument: As above, switched to Instrument (inputs 1 & 2 only)
Instrument Gain: +13dB to +60dB
ANALOGUE OUTPUTS Line level 8 x 1/4" TRS Jack
Nominal output level 0dBFS = 16dBu, balanced, +22dBu globally switched with external PSU connected across all outputs
Frequency Response: 20Hz – 20kHz +/- 0.2dB
THD+N <0.0010% (-100dB) (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
Software switched hardware DIM –12dB in output pairs 1-2, 3-4, 5-6, 7-8
Software Digital Volume control for all outputs
All outputs are useable as monitoring outputs
DIGITAL I/O 2 x SPDIF (RCA phono) on rear panel (24-bit, 192kHz) Output transformer isolated
2 x ADAT In / Out (44.1 / 48kHz), 16 channels
1 x ADAT In / Out (88.2 / 96kHz), 8 channels S-MUX
Word clock input on BNC
Word clock output on BNC
MIDI I/O 1 in / 1 out on rear panel
FIREWIRE S400 2 ports
POWER Either via FIREWIRE or external PSU (included)
HEADPHONE MONITORING 2 x 1/4" TRS Jack on front panel (mirrors outputs 5-6 and 7-8)
High power headphone drivers
* NOTE: Version 1.0 software allows input mixing at 44.1/48kHz and 88.2/96kHz(ADATS disabled). When ADATs are enabled, at 88.2/96kHz mode, the input mix functionality is no longer available.
System Requirements
Macintosh
OS **Mac OS X Panther (10.3.3 or later)
Computer Apple® Macintosh® series with on board Firewire
CPU/Clock G4/800 MHz
Memory (RAM) 256MB or more
Windows
OS Microsoft® Windows® XP Home Edition/XP Professional
Computer Windows® XP compatible PC equipped with a IEEE1394/FireWire port
**Firewire control chip from TI (Texas Instruments) is recommended CPU/Clock Pentium®, Celeron®, or Pentium® compatible processor 900MHz or higher
**Pentium® 4/2GHz or higher recommended for 192kHz
*Memory (RAM) 256MB or more
In case of using IEEE 1394 interface card such as PCI card or Card bus (PCMCIA), TI (Texas Instruments) made IEEE1394 Host Controller is recommended. Some Card bus (PCMCIA) type interfaces may not work to full interface performance.
