Totem arro

Vedi tutti i prodotti Totem Acoustics presenti su CHERUBINI.com

finitura:	ciliegio / acero mogano / nero

Tabella Prezzi e Disponibilità

Descrizione

• Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
• Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.

Break in time:	100 – 150 hours
Placement from rear wall:	6" - 3'
Placement distance apart:	2' - 12'
Mass Loading:	10-20 lbs in each cabinet
Frequency Response:	40 Hz to 20 kHz ± 3 dB with proper room positioning
Impedance:	4 ohms
Sensitivity:	87 dB
Power:	80 W max. program
Crossover frequency:	2.4 kHz 2nd order linkwitz-riley (optimized)
Woofer:	4 1/2" sandwich cone double magnet”
Tweeter:	1impregnated textile dome 3/4" (low resonance freq.)
Max SPL's:	In average size listening room 103 dB peak (12' x 15') from pair at 2 m
Dimensions:	w 5 x d 7 x h 34" w 127 x d 178 x h 864 mm

 IL PREZZO SI INTENDE PER COPPIA

Stampa la scheda prodotto

Scheda Tecnica

Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.
Break in time: 100 – 150 hours
Placement from rear wall: 6" - 3'
Placement distance apart: 2' - 12'
Mass Loading: 10-20 lbs in each cabinet
Frequency Response: 40 Hz to 20 kHz ± 3 dB with proper room positioning
Impedance: 4 ohms
Sensitivity: 87 dB
Power: 80 W max. program
Crossover frequency: 2.4 kHz 2nd order linkwitz-riley (optimized)
Woofer: 4 1/2" sandwich cone double magnet”
Tweeter: 1impregnated textile dome 3/4" (low resonance freq.)
Max SPL's: In average size listening room
103 dB peak (12' x 15') from pair at 2 m
Dimensions: w 5 x d 7 x h 34"
w 127 x d 178 x h 864 mm