Audient ASP008

Vedi tutti i prodotti Audient presenti su CHERUBINI.com

interfaccia opzionale:	Interfaccia ADAT interfaccia Aes/Ebu solo pre

Tabella Prezzi e Disponibilità

Descrizione

The ASP008 is a compact, 1U rack mount unit featuring eight ultra high quality mic preamplifiers developed from the renowned mic-pre design used in the acclaimed ASP8024 recording console.

The design uses an 8 transistor discrete Class A front end with extended band-width and a noise floor close to the theoretical Johnson limit. Carefully chosen close tolerance components are used to achieve high CMRR at all gain settings and distortion is minimised to less than 0.001% at 20dB gain and +10dBu output. This outstanding technical performance delivers a mic amp with incredible transparency and detail without colouration or other unwanted artefacts.

Each Mic amp also features switchable input impedance, allowing the user to explore the subtle variations in microphone character that are determined by output termination.

All channels include an XLR input, 'soft start' 48V phantom power, switchable input impedance, 25-250Hz hi-pass filter as well as line input selection. Channels 1 and 2 also feature a -20dB attenuator and a high-impedance Instrument/DI input on a front panel mounted jack. LEDs provide indication of signal present and overload.

Two digital output option cards are available - one with ADAT optical interface, the other with AES/EBU and ADAT. 

• Discrete Class A front end
• Switchable input impedance
• Two Instrument inputs
• Variable Hi-Pass filter on all inputs
• Line level input on all channels
• Phase invert on all channels
• Signal status indication
• Optional ADAT, AES/EBU and S/PDIF outputs with selectable Sample rate and Dither

TECHNICAL SPECIFICATION

CONTROLS   48V INST/DI -20dB LINE Polarity filter PK SIG I/P Z GAIN Sample Rate Dither Phantom Power ON/OFF with 'soft start' feature to avoid thumps CH 1&2 only. Selects jack instrument input with input impedance > 1M ohm 20dB Pad (CH1 &2 ONLY) Selects Line level input with input impedance of 10k ohm Polarity invert Selects 12dB/octave Hi-Pass filter - range 25Hz to 250Hz Indicates signal levels within 4dB of clipping Indicates signal levels above -25dBu Input impedance select 200/1200/5000 ohms MIC/DI 0 to 60dB. LINE -20 to 40dB Selectable 44.1/48/88.2/96 kHz Selectable 16/20/24 bit INTERFACES   MIC Input LINE Input INST/DI Input LINE Output Digital output Ext Word Clock Electronically balanced XLR with variable input impedance Electronically balanced 25 pin D wired to DA88 standard Unbalanced front panel mounted jack Electronically balanced 25 pin D wired to DA88 standard Optional 48/96kHz AES, S/PDIF and 48kHz ADAT light-pipe. BNC CONTROLS   Maximum input/ output level THD EIN Frequency Response CMRR Dimensions Weight Power consumption +21.5dBu Typically better than 0.007% at 1kHz any gain setting Better than -127.5dB @ 60dB gain/ref 150 ohms -0.3dB @10Hz to -3dB @300kHz at unity gain Better than 75dB at 1kHz and 60dB gain 480mm x 278mm x 44mm 4.5Kg 40 watts In keeping with our policy of continuous improvement Audient plc reserves the right to alter specifictions without prior notice. E & OE