T+A A 1530

Vedi tutti i prodotti T+A presenti su CHERUBINI.com

Descrizione

Is there such a thing as a powerhouse with tender feelings? Undoubtedly there is, and the new A 1530 is the proof. Its predecessor, the A 1520, was due for a work-out in the gym, and when it emerged it had developed new High End mica capacitors, precision resistors and optimised torroidal transformers. However, the really significant feature of the A 1530 is its silver / copper circuit board technology, which is completely new in the audio world. This innovation has also been introduced in all our power amplifiers and integrated amplifiers, with immediate effect. The new technology, developed in the field of RF applications, uses silver as the conductor in the circuit boards, and the sonic advantages are enormous. The new circuit boards are also non-magnetic, and all connections and contacts are also non-magnetic, completely eliminating the disturbing distortion which can be caused by induction effects.

The ICA technology  incorporated in our amplifiers was developed by T+A with the aim of de-coupling the amplifier’s input stage from the current amplifier stage. The result has been a clear improvement in the overall sound and in the spatial characteristics. The new push-pull class A mirror current stage is designed to cope with high-level signal processing, and features transistors with a transient frequency of more than 300 MHz. The result is virtually bottomless dynamic reserves, a vast bandwidth and tremendous speed. Naturally the A 1520 R can be used as a normal stereo power amplifier, but it can also be employed in other modes, e.g. for bi-wiring, or bi-amping in conjunction with other T+A power amplifiers. To protect the amplifier and the speakers connected to it an electronic circuit monitors the signals in the amplifier. This protective circuit is not located in the signal path, so it has absolutely no influence of any kind on the sound image. The circuit monitors the input signal before the output stage, and compares it with the output signal. If the slightest deviation occurs (clipping, distortion etc.) the circuit switches off the output relays. The protective circuit also trips if the outputs are shorted, or if the unit overheats.
 
Connection elements
 
INPUT
 Asymmetrical amplifier input with an input sensitivity of 1 Veff.
 
XLR
 Symmetrical amplifier input (XLR) with an input sensitivity of 1.55 Veff.
 
SPEAKER A + B
 Two pairs of loudspeakers can be connected (SPEAKER A and SPEAKER B). The impedance of each speaker must not fall below 4 Ohm (DIN rating).
 
CRTL
 If the power amplifier is operated with an (optional) remote-controlled pre-amplifier (e.g. P 1220 R), then the CTRL IN socket should be connected to the pre-amplifier’s OUT CTRL socket via the RZ 001 remote control lead.
 
RLink
 Interface for future system expansions
 

Stampa la scheda prodotto

Scheda Tecnica

Stereo operation

Nominal output 8 Ohms
170 Watt

per channel, both 4 Ohms
280 Watt

Peak output 8 Ohms
185 Watt

4 Ohms
340 Watt

Bridged mono operation

Nominal output 8 Ohms
500 Watt

4 Ohms
600 Watt

Peak output 8 Ohms
700 Watt

4 Ohms
900 Watt

Power bandwidth
1 Hz – 300 kHz

Frequency response + 0 – 3 dB
0,5 Hz – 350 kHz

Slew rate, stereo
60 V/us

Slew rate, mono
120 V/us

Damping factor
> 500

Signal: noise ratio (A-weighted)
> 114 dB

Total harmonic distortion
< 0,001 %

Inputs
XLR, Cinch

Reservoir capacity
120000 uF

Mains supply, 110 V or 220 / 240 V, 50 Hz
650 VA

Dimensions
15 x 44 x 39 cm

Weight
18,5 kg

Colours
Black (9005), Silver aluminium, Chrome (Non-standard version)

Remote control
Via R system